Use this function to add steam. This function injects steam late in the drying cycle to reduce the static electricity caused by dry fabrics rubbing together.
Turn on the dryer and turn the cycle selector knob to select the desired cycle.
Use the cycle modifier buttons to customize the settings for that cycle.
Press the . (Estática baja (Low Static)) button.
When this function is selected, the Húmedo (Damp) and Menos (Less) dry levels cannot be selected.
Select Encendido (ON).
Press the Start/Pause button to start the cycle.
Do not touch the door during steam cycles. The door surface can become very hot.
Do not attempt to reach into the dryer during a steam cycle. Steam can cause severe burns.
Steam may not be clearly visible during steam cycles. This is normal.
Do not use steam with delicate fabrics such as wool, silk, or easily discolored fabrics.
When the filter/duct is clogged, this option may not have optimal results.
When this function is operating, the drum will stop to allow steam to stay in the drum.