Adjusting and Leveling the Appliance
When the appliance is not perfectly level, turn the adjustable feet until the appliance no longer wobbles.
Slide the dishwasher into the cabinet, opening carefully.
Make sure that the drain hose behind the machine and inside the cabinet is not kinked or stretched.
Adjusting Front Levelling Feet
Use a flat-blade screwdriver to turn the front levelling feet and adjust the front of the tub.
Turn the front levelling feet clockwise to raise the front of the tub up to 60 mm a and counterclockwise to lower it up to 60 mm a.
The adjustments work identically for both front levelling feet.
Adjusting Back Levelling Feet
Use a phillips screwdriver to adjust the rear levelling foot and the rear of the tub using the centre screw at the base of the appliance in the front.
Turn the centre screw clockwise to raise the rear of the tub and counterclockwise to lower it.
NoteTo avoid damaging the screw, do not use an electric screwdriver.
Use a spirit level to check the correct alignment in all directions.
Case 1. The Door is Slanted to the Right
Unscrew (counter-clockwise) the front left leg and correct the level.
Check the opening of door and repeat if necessary until the door opens and closes properly.
Case 2. The Door is Slanted to the Left
Unscrew (counter-clockwise) the front right leg and correct the level.
Check the opening of door and repeat if necessary until the door opens and closes properly.
