Control Panel Features

DescriptionaPower On/Off ButtonPress this button to turn the washing machine on or off.bProgramme KnobProgrammes are available according to the clothes type.The lamp will light up to indicate the selected programme.cStart/Pause ButtonThis button is used to start the wash programme or pause the wash programme.If a temporary stop of the wash programme is needed, press this button.dExtra Options and FunctionsTo use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display.This allows you to select an additional programmes.eCustomizing Washing Programme ButtonsUse these buttons to adjust the water temperature or spin speed settings for the selected programme.The current settings are shown in the display. Press the button for that option to select other settings.fDisplayThe display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate.While the load weight is sensed automatically, the display on the control panel blinks.DescriptionaProgramme Status IndicatorsWhen a washing programme is running, LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.bAI DDAI DD M provides the appropriate drum rotation actions after load sensing is completed.M is activated when the AI Wash programme is selected and operated.If too much detergent is used, too many suds can occur and this will cause poor AI DD performance.cEstimated Time RemainingWhen a washing programme is selected, the default time for that programme is displayed. This time will change as options are selected.If the display shows --- , then the time will be displayed after the load sensing has detected the load size. This is normal.The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load weight, room temperature, incoming water temperature, etc.) can affect the actual time.dH lights up when the programme starts and the door is locked.ez lights up when the Delay End option is activated.fy lights up when the Tub Clean option is activated.gI lights up when the Pre Wash option is activated.ho lights up when the Intensive option is activated.iG lights up when the Rinse+ option is activated.