Preparing

• Connect the water supply hose a to the water supply inlet.

• Connect the power cord b to the electrical outlet.

• Always keep the level of drain hose c slightly lower than the lowest part of the washing machine.

• Use new inlet hose available with machine.

• Check the position of overflow filter (low/medium/high), adjust it as per the quantity of cloth. During washing, re-adjust the lever d to prevent water leakage.

  

• Set the water selector lever to WASH for washing/rinsing & to SPIN for interim spin rinse.

  Note

  • The water selector lever should not be placed near the center otherwise water flows to the wash and spin tub simultaneously.

  

• For your convenience hang up the wash cover on the left side of the washing machine tub when not in use.