Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

  1. Water Supply Inlet

    • Connect here with the inlet hose from the water tap to feed water to the tub.

  2. Water Selector

    • Select WASH to supply water for washing and rinsing and SPIN for spin shower rinse.

  3. Wash Timer

    • The Wash Timer can be used for soak, wash and rinse operations. Select the desired time for soaking, washing or rinsing.

  4. Wash Selector

    • Set the selector to Gentle, Normal, Strong according to kinds and quantity of the laundry.

  5. Drain Selector

    • Select Wash.Rinse for washing and rinsing, and Drain to drain the water out of the tub.

  6. Spin Timer

    • Select the desired time for spinning. The maximum limit is 5 min but shall not be continued over 3 cycles.

    • Don't rotate the knob more than prescribed limit.

    Note
    • After spinning continuously for 3 times, do not spin for more than 1 hour. Otherwise, the spin motor may be damaged, catch fire, or stop operating.