This option automatically sets the spray intensity to soft for the upper spray arm and strong for the lower spray arm. Place heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.
This option washes intensively by selecting the upper or lower racks. For small loads, use just the upper or lower rack to save energy and time. By pressing the Половинная загрузка (Half Load) button, the settings f (Upper), g (Lower) and the cancellation of the this option are available.
This option saves energy by reducing the wash and rinse temperatures. Wash time is increased to maintain wash results. Do not use this cycle with heavily soiled dishes.
Raises the main wash or heating rinse temperature to improve cleaning.
A chime will sound to alert you of any residual temperatures inside the appliance. Wait for the appliance to completely cool down before opening the door.
Select this option for better drying results. This option adds extra drying time to the cycle and raises the heating rinse temperature.
When the rinse aid is empty, this option is selected automatically.
This feature delays the start of a selected cycle. Each time the Отсрочка старта (Delay Start) button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.
To cancel this feature, turn the power off.
To change the cycle and cycle option, open the door and then select another cycle and cycle option. The countdown will continue.
This feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door.
On models with the external display, while a cycle is running, press and hold Половинная загрузка (Half Load) and Энерго-сбережение (Energy Saver) simultaneously for 3 seconds to activate or deactivate this feature. On models with a concealed display, open the door during operation and follow the same instruction.
When this feature is activated, the display code CL will show on the display.
To start a new cycle, deactivate this feature.
This feature can be set at any time by turning on the appliance.