Cleaning the Dual Floor Max Nozzle

Clean the brush and roller heads before each use.

• If the brush contains foreign objects, the brush may not spin or a noise may occur during operation. This could also damage the flooring.

• Press the nozzle release button a to remove the nozzle from the extension pipe or product body.

  

• Turn the nozzle upside down. Press the button on the nozzle and turn the cover lock clockwise.

  

• Pull the brush cover forward and pull the main brush out.

  

• With the left button of the sub-brush pressed, pull the sub-brush out.

  

• Attach the crevice tool to the product body and use the vacuum to remove foreign objects and dust from the main brush, sub-brush and the bottom of the nozzle.

  

• Use a damp towel or cloth to remove any remaining foreign objects and dust from both the brush and the bottom of the nozzle.

  • Carefully use a tweezers to remove foreign objects from the nozzle rollers.

  • Do not rinse or submerge the rotating brush or nozzle in water.

  • Use a wet towel or cloth to clean both the rotating brush and nozzle.

    

• Slide the brushes back into the nozzle and rotate the cover back into place. Turn the cover lock clockwise to lock the cover.