Status Display

The display shows the dust emptying operation status or when to replace the dust bag, charging status of the spare battery, and dust emptying mode.

Start

Press the Start/Stop button once to start the dust emptying operation.

• With the Start/Stop button is selected, a melody plays. When the vacuum cleaner is mounted in the emptying station, the dust bin cover opens automatically and the dust emptying operation begins.

• When you purchase the product, the manual dust emptying mode is set by default.

Stop

Press the Start/Stop button once to cancel the dust emptying operation.

• When the dust emptying operation is canceled, the product returns to the charging status.

  • In the Finishing Step(the dust bin cover closes automatically), the Start/Stop button is inactive.

• Residual dust in the suction area may fall on the floor when the Vacuum Cleaner is removed from the station after the dust emptying operation is canceled.

  • If the dust emptying operation is canceled, the dust bin may not be emptied completely and dust will remain on the duct suction area.

  • Complete the dust emptying operation before using the Vacuum Cleaner.

Change Dust Emptying Mode

Press and hold the Start/Stop button for at least 3 seconds to switch between automatic or manual dust emptying mode.

Dust Emptying (Replace Bag) Indicator

• Indicates the dust emptying operation status or when to replace the dust bag.

  • White: Product is emptying dust.

  • Flashing red: If the indicator flashes red while emptying dust, this indicates dust bag requires replacement. At the end of dust emptying operation, replace dust bag.

  • Flashing red, beeping: If the dusty emptying operation is complete and the dust bag is full, the indicator will flash red, beep 10 times and then turn off.

  • If the indicator flashes red, replace the dust bag to maintain product performance.

Spare Battery Indicator

• Indicates the charging status of the spare battery.

  • Flashes: When the spare battery is mounted in the charger.

  • On (steady): Spare battery charging is complete.

  • The spare battery will not charge until the battery mounted in the vacuum cleaner is fully charged. Check the battery level on the handle of the vacuum cleaner to check whether charging is complete.

Auto Emptying Indicator

• Lights to indicate that the automatic dust emptying mode is on.

  • Automatic dust emptying mode automatically starts the operation every time the vacuum cleaner is mounted correctly onto the product.

  • If you remove the vacuum cleaner and mount it immediately, dust emptying operation may not start automatically, depending on the circumstance. If it doesn't start automatically, select the Start/Stop button to start.