Top > OPERATION > Extra Options and Functions > Customising a Washing Programme

Customising a Washing Programme

Each programme has default settings that are selected automatically. You may also customise these settings using these buttons.

Secar Con Aire (Air Dry)

When you select Secar Con Aire (Air Dry), you can reduce the drying time by minimizing the moisture that remains within the clothes.

  • Press the Secar Con Aire (Air Dry) button to select this option.

Note

  • Always keep the clothes amount to 2 kg or less and make sure to redistribute the clothes evenly.

  • Select 60 minutes for cotton clothes and 120 minutes for synthetic fibre clothes for effective moisture reduction.

Tub Dry

Use this option when you want to dry the empty tub after a wash.

  • Remove your clothes after a wash.

  • Press the ENCENDIDO/APAGADO (POWER) button.

  • Press the Secar Con Aire (Air Dry) button to select the Tub Dry.

  • Press the INICIO/PAUSA (START/PAUSE) button.

Temperatura (Temp.)

Use this option to change water temperature.

  • Press the Temperatura (Temp.) button until the desired setting is lit.

Nivel de Agua (Water)

This appliance detects the amount of laundry automatically, then sets the water level. However, manually increasing the water level may be required and recommended to avoid linting and unbalanced errors when the load is bulky but lightweight.

  • Press Nivel de Agua (Water) option to adjust water level.

  • When you select a wash programme, the water level will be shown on the control panel.

  • When water level is automatically detected, it may differ depending on the amount of laundry even though the same water level is indicated on the control panel.

Lavado (Wash)

Adjusting the wash time setting modifies the cycle times and/or wash actions.

  • Press Lavado (Wash) button until the desired wash time is selected.

Enjuague (Rinse)

Use this option to change the number of rinses.

  • Press Enjuague (Rinse) button to change the number of rinses.

  • When the Enjuague (Rinse) option is selected, l icon is lit.

  • If selecting the maximum number of rinses, then this option is deactivated.

Note

  • This option is only available on some programmes.

Centrifugado (Spin)

Use this option to change the spin strength. When you press the INICIO/PAUSA (START/PAUSE) button after selecting this option, the remaining time is indicated on the display.