For Steam Models

Top view

Front view

1. Power

   • Press Power button to turn power on and off.

   • After the cycle is complete, the power automatically turns off for purposes of safety and economy.

   • If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.

   • When power is connected again, it will turn on automatically and resume the cycle.

2. Option Setting Mode

   • Various functions of the product can be set through Option Setting Mode.

   • With the power turned off, press Power button and Half Load button simultaneously to enter Option Setting Mode.

   • For details on each function in option setting mode, refer to Using the Option Setting Mode.

3. Digital Display

   • The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.

   • The estimated time shown on the display does not include delay times for heating water, etc.

   • If Delay Start is selected, the display shows the delay time in hours.

   • The Auto cycle time may vary depending on the soil level of your load.

4. Wi-Fi

   • When the appliance is connected to the internet through a home Wi-Fi network, this icon illuminates.

5. Drying Fan Icon

   • This icon illuminates when the drying fan is operating.

   Keep Fresh Mode

   • This icon illuminates when the Keep Fresh Mode is operating.

   • To turn it On/Off, enter Option Setting Mode and press Steam button.

6. Rinse Aid Refill Icon

   • This icon flashes when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.

7. Salt Refill Icon

   • This icon flashes when the salt level is low. The LED automatically shuts off when the salt is refilled.

8. Cancel

   • The drain pump activates and the cycle cancels. Once the appliance finishes draining, the power turns off.

   • Press and hold START button for 3 seconds to activate the cancel function.

9. START

   • To operate the appliance, either (depending on display type) press START button and close the door or close the door and press START button.

   • If START button is not pressed to start the cycle within 4 minutes, the power will automatically turn off.

10. Front Time Indicator

    • The front time indicator feature displays the remaining cycle time while the cycle is running. When the door is opened, remaining cycle time will be displayed on the top display.

    • The actual washing time may be different to washing time on the display. This may vary depending on the supply water temperature, water pressure, voltage, amount of tableware, etc.