This option adds steam during the cycle to improve wash results.
This option washes intensively by selecting the upper or lower racks. For small loads, use just the upper or lower rack to save energy and time. By pressing the Half Load button, the settings f (Upper), g (Lower) and the cancellation of the this option are available.
This option saves energy by reducing the wash and rinse temperatures. Wash time is increased to maintain wash results. Do not use this cycle with heavily soiled dishes.
Raises the main wash or heating rinse temperature to improve cleaning.
A chime will sound to alert you of any residual temperatures inside the appliance. Wait for the appliance to completely cool down before opening the door.
Select the Dry Boost option for better drying performance. This option adds heated drying time to the cycle for better drying results.
To use the Dry Boost option, turn on the Auto Open Dry function.
If select the Dry Boost (+40/60/90 min) option, the drying time will be added to the course and displayed.
When Dry Boost option is applied, the operating time may decrease for some cycles.
If you open the door further during the Auto Open Dry function, the high-temperature alarm will sound and the Dry Boost will stop. If you close the door, it will open automatically again and the Dry Boost will resume
This feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.
To cancel this feature, turn the power off.
To change the cycle and cycle option, open the door and then select another cycle and cycle option. The countdown will continue.
Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle.Once this function is enabled, you can start a cycle from the LG ThinQ Application.
This feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door.
On models with the external display, while a cycle is running, press and hold Half Load and Energy Saver simultaneously for 3 seconds to activate or deactivate this feature. On models with a concealed display, open the door during operation and follow the same instruction.
When this feature is activated, the display code CL will show on the display.
To start a new cycle, deactivate this feature.
This feature can be set at any time by turning on the appliance.
Press and hold Remote Start for 3 seconds to connect to the network. Refer to SMART FUNCTIONS sections for detailed information about this feature.