Installing the Home Station

Always keep the home station plugged in when in use. If the home station is not plugged in, the robot cleaner will not return to the home station to charge automatically when the battery is low or when the cleaning is completed.

• Before use, remove both the foam strips from behind the collision bumper.

  • If the foam strip are not removed, it may be difficult for the Robot Cleaner to find the charging station or product performance may be adversely effected, and may cause damage to furniture and skirtings.

  

• Open the cover at the bottom of the charging stand, connect the adapter to the charging stand, and wrap the power cord around the power cord organizer as shown in the picture. Assemble the cover at the bottom of the removed charging base until you hear a “click” sound.

  

• Install the charging dock onto the floor damage prevention plate. When installing the charging dock, first slide the charging dock into the groove on the front of the damage prevention plate and then press to install it.

  

• Place the home station on a level surface, keep the surrounding area open, and place it against the wall.

  

• Place the home station on a flat and firm indoor floor and place it hard against a suitable wall in your selected location. Do not install, store or place the home station charging dock or the robot cleaner in any outdoor or sheltered outdoor location.

  • Remove all obstacles from around the home station.

    

• Connect the adapter to a wall outlet.