Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

Note

  • WW132NP does not have any display indicator.

  1. UV Sterilizing Indicator

    Purified water is sterilized by the UV LED. When UV LED indicator will glow, it indicates that UV sterilization is ON.

    When tank cover is open, UV LED will be automatically turned off for your safety.

    Note

    • The UV LED operates in any of the following 2 cases.

      • It operates for 75 minutes in every 6 hours.

      • It operates for 75 minutes after approximately 2 seconds when power is turned on following a power failure.

    • Disclaimer:

      UV nano is a compound word derived from the words UV and its unit, nanometre.

  2. Filter Change Indicator/Replace Filter Indicator

    This feature is applicable for only out sediment filter.

    When the color of indicator changes from blue to amber, this indicates that it is time for preventive maintenance service. Please call LG customer care for service.

    When the filter change indicator glows, it indicates that it is time for preventive maintenance service. Please call LG customer care for service.

  3. Power Indicator

    The Power LED glows to indicate ON condition of water purifier.

  4. Tank Full Indicator

    When the water storage tank gets filled up completely then tank full indicator will turn ON.

Using Purified Water

When you press the touch lever, purified water will come out.

If you wish to dispense continuously, lift the touch lever upward.

Caution

  • Open this lever to 90 degrees only. Opening more than 90 degrees may cause it to malfunction/damage.