Cleaning the Dust Bin
Empty and clean the dust bin after every use.
If the dust bin is completely full of dust or the filter is clogged, the suction power may be reduced.
Remove the battery from the product body before cleaning the dust bin.
Press the dust bin cover release button a to open the dust bin cover. Shake the dust bin to empty it.
Be careful as dust or foreign objects may spill out when opening the dustbin. Empty the dust bin into a wastebasket or where dust and foreign objects can be easily removed.
Insert the crevice tool c into the Cyclonic Mesh Filter b and turn it counterclockwise to remove the filter.
Wash the Cyclonic Mesh Filter under running water.
To avoid odour and the malfunction of the motor, allow the Cyclonic Mesh Filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.
Use the combination tool to clean out dust or foreign objects inside the dust bin.
Never wash the product body with water. Water could reach the motor and cause electric shock or fire.
Do not use the product body to suck up oils or any liquids, including water.
Do not use the appliance without the Cyclonic Mesh Filter installed. Doing so could damage the product.
Do not insert fingers or sharp objects into the motor to avoid product damage, personal injury, or electric shock.
Do not allow foreign objects to reach the motor to avoid product damage, explosion or fire.
Do not apply force or allow impacts to the Cyclonic Mesh Filter. Doing so could deform the filter, compromise product performance, or cause the product to malfunction.