Cleaning the Multi-Surface Nozzle

Clean the brush and roller heads before each use.

• If the brush contains foreign objects, the brush may not spin or a noise may occur during operation.

• Press the nozzle release button a to remove the nozzle from the extension pipe or product body.

  

• Turn the nozzle upside down and rotate the cover lock slot b counterclockwise.

  

• Pull the brush cover forward and pull the brush out.

  

• Attach the crevice tool to the product body and use the vacuum to remove foreign objects and dust from the brush and the bottom of the nozzle.

  

• Use a damp towel or cloth to remove any remaining foreign objects and dust from the brush and the bottom of the nozzle.

  • Carefully use a tweezers to remove foreign objects from all of the nozzle rollers.

  • Do not rinse or submerge the rotating brush or nozzle in water.

  

• Slide the brush back into the nozzle and rotate the cover back into place. Turn the cover lock clockwise to lock the cover.