Removing the Freezer Door

• The water supply is connected to the upper right part of the rear surface of the refrigerator. Remove the clip in the joint area. Hold the water supply connection and gently push the collet a to detach the water supply line as shown.

  

  Note

  • Disassembling/Assembling the Water Lines

    

    b Collet c Tube d Insert line e Clip

• Remove the screws from the water line cover f and detach the cover.

  

• Pull out the water supply lines g at the top of the refrigerator. Disconnect all the wire harnesses h. Unscrew the ground wire i.

  

  Note

  • The number of wire harnesses may vary depending on the model.

  • Ground wire is only present on some models.

• Rotate the hinge lever j counterclockwise. Lift the top hinge k free of the hinge lever latch l.

  

  Caution

  • When lifting the hinge free of the latch, be careful that the door does not fall forward.

• Free the hinge from the water lines and wire harnesses and set it aside.

• Lift the door from the bottom hinge pin m and place it, inside facing up, on a non-scratching surface.