Using a Wireless Router

A wireless router connects several PCs, mobile devices, etc. to one internet line and allows you to use the Internet and the network.

A wireless router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.

Model 10T370 supports wireless LAN connection only.

Connecting a Wireless Router

If one internet line is used with a wireless router and several devices are connected, this may result in a slower connection.

In case of a wireless LAN, it is recommended to change the network name and security settings for a more secure connection.

Network speed can differ according to operation environment and specifications.

Connect the router-only AC adapter to a power outlet.
Connect the AC adapter's jack with the router's power port and check if the power is turned on.
When the router turns on, connect the internet cable of the modem that was provided by your internet provider to the router's WAN port.
Please refer to the manual provided by the router manufacturer for setup of the network and internet.

Tip:

Refer to [Wireless LAN] to connect the PC to the router.

Tip:

Changing the wireless LAN security settings

If you are using WEP for security settings, you can improve your wireless network environment by changing it to WPA2/AES that provides better security.

If WEP is used for security settings, the speed is limited to 54 Mbps.
Enter the wireless router's IP address (e.g. 192.168.0.1) in the address bar to go to the [Wireless Setup/Security] menu.
Change the security settings to WPA2/AES and save the settings.

On the right side of the taskbar, touch the [] icon for about 2 seconds or right-click it and select [Open Network and Sharing Center]. Then select the wireless LAN in use to check the wireless LAN speed.