Installation Location
This appliance must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface.
If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (850 X 600 mm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.
Ensure that when the appliance is installed, it is easily accessible for an engineer in the event of a breakdown.
When installing the appliance, adjust all four feet using the transit bolt spanner provided to ensure the appliance is stable.
Floor Installation
minimum space for installation
To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances on the sides and behind the appliance. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
- The faucet is to the REAR when the appliance is placed.
- The faucet is to the SIDE when the appliance is placed.
A | 30 cm*1 |
W | 70 cm |
B | 5 cm |
C | 20 cm |
D | 77 cm |
D' | 140 cm*1 |
H | 189 cm |
H' | 200 cm |
A | 15 cm*1 |
W | 70 cm |
B | 5 cm |
C | 10 cm |
D | 77 cm |
D' | 140 cm*1 |
H | 189 cm |
H' | 200 cm |
This appliance must only be used for domestic household purposes and should not be used in mobile applications.
Never try to level any uneven floor by putting pieces of wood, cardboard or similar materials under the appliance.
Ventilation
- Alcove or under counter
- Cupboard
Make sure that air circulation around the appliance should not be impeded by carpets, rugs, etc.
Cupboard door must have 2 (louvered) openings, each having a minimum area of 387 cm2, located 8 cm from the bottom and top of the door.
Ambient Temperature
Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.
The appliance performs best at a room temperature of 23 ℃.