Removing the Transit Bolt Assemblies
To prevent the appliance from severe vibration and breakage, remove transit bolts and retainers.
Starting with the bottom two transit bolts a, use the spanner (included) to fully loosen all transit bolts by turning them counterclockwise.
Remove the bolt assemblies by wiggling them slightly while pulling them out.
Install the hole caps.
Locate the hole caps b included in the accessory pack or attached on the back.
Note
Save the transit bolts and retainers for future use.
To prevent damage to the appliance during transport:
Reinstall the transit bolts.
Secure the power cord to the back of the appliance.