Connecting the Drain Hose to the Dryer
Remove the stamped area on the middle of the bracket to make an opening for the drain hose of the dryer.
Insert the hose clamp a onto the drain hose of the dryer.
Connect the drain hose of the dryer and secure the hose clamp.
Loosen the screw b on the stack bracket.
Screw in the band to secure the drain hose of the dryer onto the stacking bracket.
Use the provided tie strap c to secure the 2 drain hoses in place.
Note
The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly.
Securing the drain hose correctly will protect the floor from damage due to water leakage.
If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise.