Connecting Hoses to the Drain Hose Connector
Slide the included band clamp onto the end of the drain hose of the washer.
Connect the drain hoses from the washer and dryer to the drain hose connector. Tighten the band clampa to keep the washer hose in place.
Use the band clampb on the short drain hose (included) to attach it to the bottom opening of the drain hose connector.
Connect securely the short drain hose to a floor gully or a standpipe.
When connecting to a waste spigot, use the band clampc to the end of the short drain hose.
Adjust the wire hose clamp to prevent the hose from coming loose or leaking. Failure to do so could result in flooding. Use of the drain hose connector helps avoid siphoning, odours, or improper draining.
Make sure the drain hoses are not kinked or pinched. This is a potential cause of drainage problems or noise.
Depending on the installation environment, you may have to purchase a separate drain hose connector. The connector supplied will suit a standard laundry tub side drain hole.
Use the elbow bracket (included) if necessary. When installing the drain hose to a sink, secure it tightly with string.
