You can customize the programmes by using the following special options:
Adding this option helps provide better cleaning results.
Adding this option reduces the programme time but the similar washing results will be provided.
Press the Power button.
Select a washing programme.
Change the washing programme (Temp., Rinse or Spin) as necessary.
Press the Steam or TurboWash button.
Press the Start/Pause button.
Setting this function allows the the dryer to operate automatically after the washing programme.
Press the Power button of the washer.
Select a washing programme.
Change the washing programme (Temp., Rinse or Spin) if necessary.
Press the TurboWash button of the washer for 3 seconds.
Press the Start/Pause button of the washer.
When the dryer is turned, the paired drying programme and option will be displayed.
After the load weight is sensed, the dryer display shows the estimated remaining dry time for about 1 minute.
While the Prepare to Dry is in operation, the dryer display shows PrE.
After the washing programme is finished, load items into the dryer and close the door.
Press the Start/Pause button of the dryer.
The dryer display shows the estimated remaining dry time.
the Prepare to Dry function will not be activated in the following cases:
If you don't start the dryer within 15 minutes after the washing programme has finished
If the dryer is unplugged
If the remote control function is used
If the washer or dryer is shut down while setting the Prepare to Dry function
When the option is set, only the Power button works and lock the door. Open the door of the dryer after the washing programme has finished.