Top > OPERATION-DRYER > Control Panel and Programme Table > Control Panel Features

Control Panel Features

Description

a

Power On/Off button

  • Press the button to turn the appliance on. Hold again to turn the appliance off.

  • Pressing the Power button during a programme will cancel that programme and any load settings will be lost.

b

Programme Buttons

  • Programmes are available according to the clothing type.

  • The lamp will light up to indicate the selected programme.

c

Start/Pause Button

  • This Start/Pause button is used to start or pause a dry programme.

  • When in pause, the power is turned off automatically after a certain time for safety reasons.

d

Additional Programme Buttons / Extra Options and Functions

  • Use these buttons to select the desired options for the selected programme. Not all options are available in each programme.

  • To use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display.

Remote

  • With the LG ThinQ app, you can use a smartphone to control your appliance remotely.

  • In order to use the Remote Start function, refer to SMART FUNCTIONS.

Wi-Fi

  • Press and hold EcoHybrid button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.

e

Time and Status Display

  • The display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate.

Time and Status Display

Description

a

f lights up when the appliance is connected to Wi-Fi network at home.

b

w lights up when the remote control feature is activated.

c

H lights up when the programme starts and the door is locked.

d

m lights up when the beep is on. This function can be turned on or off only through the LG ThinQ application.

e

Time Remaining Display

  • When a drying programme is selected, drying time for the selected programme is displayed. This time will change when you set the extra options for the programme.

  • Error messages will appear when the appliance diagnose problems.

f

J lights up or blinks while the condenser is being washed or the thawing mode is operating.

  • Condenser cleaning operates every 30 drying cycles.

    Note

    • Drying times will be longer than usual when the condenser is being washed.

    • If a small amount of clothes are dried, the condenser will not be washed because the accumulated water during the drying cycle is not enough to wash the condenser.

g

K lights up when the lint filter should be cleaned or is inserted.

  • Cleaning notice: When you press the Power button, the icon will become displayed.

  • Missing notice: When the lint filter is not inserted, the icon will become displayed and the appliance will not operate.

h

Programme Status Indicators

  • @ lights up when the appliance is in drying progress.

  • = lights up when the appliance is in cooling progress.