Using the Appliance Remotely

Remote Start

Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle.

Using this function

• Put the clothes into the drum.

• Press the Power button.

• Press and hold Remote button for 3 seconds to enable the remote control function.

• Start a cycle from the LG ThinQ application on your smartphone.

Note

• Once this function is enabled, you can only start a cycle from the LG ThinQ smartphone application. If the cycle is not started, the appliance will wait to start the cycle until it is turned off remotely from the application or this function is disabled.

• If the door has been opened, you can not start a cycle remotely.

Disable this function manually

When this function is activated, press and hold the Remote button for 3 seconds.

Delay End

Setting this function allows the appliance to start automatically and finish after a specified time.

Using this function

• Put the clothes into the drum.

• Press the Power button.

• Run LG ThinQ application and select the product.

  • For washing, select the washer.

  • For drying, select the dryer.

• Select a washing or drying programme.

• Touch the Delay End and set the delay time.

• Start a cycle from the LG ThinQ application on your smartphone.

Note

• The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, clothes and other factors.

• Avoid using liquid detergent for this function.