Top > OPERATION > Shelf > Removing/Refitting the Shelf

Removing/Refitting the Shelf

This feature may vary depending on model purchased.

Type A

  • Tilt up the front of the shelf and then lift the shelf straight up.

  • Pull the shelf out.

  • To assemble, tilt the front of the shelf upwards and carefully guide the shelf hooks into the slots at the desired height.

    Caution
    • Assemble the shelf that will be positioned on the left side first.

  • Install the remaining shelf on the right side using the same method.

  • Lift up the left shelf, press down the right shelf, and ensure that both shelves are flat.

Caution
  • Glass shelves are heavy. Use special care when removing them.

  • Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact.

Type B

  • Slightly lift the rear of the shelf to disengage it, then pull it out.

  • Tilt the front of the shelf downward to release it from inside the compartment.

  • Position the shelf in the gap between the door and the case.

  • Use the gap to rotate the shelf and remove it.

  • Refit the shelf in the reverse order of the removal process.

Caution
  • Before removing or reinstalling the refrigerator shelves, fully open both refrigerator doors. If only one door is open, the shelf may not be completely removed.

  • Glass shelves are heavy. Use special care when removing them.

  • Remove all food from the shelf before taking it out.

  • When placing the shelf inside the appliance, do not insert it upside down or with the front and rear reversed.