Door Reversal Instructions

The instructions here are for changing the door swing from a right to a left side hinge. If the door has been reversed, and it is necessary to change it back, use care when following these instructions. Some of the illustrations and the left/right references will be reversed, and you will need to read the instructions carefully.

• Open the appliance door.

  

• You will be removing the screws shown below (6 on left, 4 on right).

  

• Remove the four decorative screws on the left using a screwdriver.

  

• Remove the two latch screws and the latch.

  

  Caution

  • Be sure to support the weight of the door before removing the hinge screws.

• Hold the hinge in place while removing the four hinge screws (to prevent the door from dropping).

  

• Remove the door from the cabinet cover.

  

• Move the door to the left side and line up the holes in the hinge with the holes in the cabinet.

  Warning

  • Be sure to support the weight of the door before inserting the hinge screws.

  

• Hold the hinge in place while inserting the two hinge screws (to prevent the door from dropping).

  

• Insert the latch on the right side and install the latch screws.

  

• Insert the four decorative screws on the right side.

  

• Check that the door closes and latches properly.