Customizing a Washing Programme

Each programme has default settings that are selected automatically. You may also customize these settings using these buttons.This button selects the wash temperature for the selected programme. Press the Temp. button until the desired setting is lit.Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care labels for best results. The spin intensity level can be selected by pressing this button repeatedly.Press the Spin button to select spin speed.If No of the spin level is selected, the drum of the washing machine will rotate before the drainage.This function is recommended for people with detergent allergies.Press and hold the TurboWash button for 3 seconds to add rinse once.Prepare the clothes and load the drum.Press the Power button.Add detergent.Select a washing programme.Customize the washing programme (Temp., Spin and Rinse+) as necessary.Press the Start/Pause button.Prepare the clothes and load the drum.Press the Power button.Do not select a washing programme and do not add a detergent.Press the Spin button.Press the Start/Pause button.If you select the washing programme, you will be unable to select a spin only. If this occurs, press Power button twice to cycle the machine off and back on.

Using Special Options

You can customize the programmes by using the following special options:Adding this option helps provide better cleaning results.Adding this option reduces wrinkles by steaming after spin.Selecting this option will tumble the clothes briefly every few minutes for up to 30 minutes after the selected programme finishes. While this option is running, ENd appears on the display.Adding this option reduces the programme time but the similar washing results will be provided.Press the Power button.Select a washing programme.Customize the washing programme (Temp., Spin and Rinse+) as necessary.To use special options,Optional 1: Press Steam or TurboWash button. Optional 2: Press and hold Steam button for 3 seconds to select the Wrinkle Care option.Press the Start/Pause button.

Using Basic Options

You can customize the programmes by using the following basic options:This option is recommended when washing a heavily soiled load.Press the Power button.Select a washing programme.Press the Pre Wash button as necessary.Press the Start/Pause button.You can set this function so that the appliance starts automatically and finishes after a specified time interval.Press the Power button.Select a washing programme.Press the Delay End button as necessary.Press the Start/Pause button.Except for LED of the Delay End button, all LEDs on the control panel will be turned off within 20 minutes. This feature may vary depending on the model purchased.The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, clothes and other factors.To cancel the function, the Power button should be pressed.Avoid using liquid detergent for this function.If the Delay End button is pressed, 3:OO is displayed. The maximum delayed time is 19 hours and minimum time is 3 hours.Each pressing on the Delay End button advances on the time delay by 1 hour.

Settings

Use this option to disable the controls. This function can prevent children from changing cycles or operating the appliance.Once this function is set, all buttons are locked except the Power button.When the controls are locked, CL and the remaining time are alternatively shown on the display during the wash while this function is engaged.Turning off the power will not reset this function. You must deactivate this function before you can access any other functions.Turn on the power.Press and hold the Delay End and Add Item button at the same time for 3 seconds to activate this function.A beeper will sound, and CL will appear on the display.Turn on the power.Press and hold the Delay End and Add Item button at the same time for 3 seconds to deactivate this function.This appliance plays a melody when it starts and stops.Press and hold the Spin button for 3 seconds to deactivate/activate this function.