Changing or Deleting the Password

You can delete or change the password only after entering the current password.

The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.

Changing the Password

Execute System Setup, enter the password, and press [Enter].
After moving [Security] by using the arrow keys from the setup start screen, click [Set Supervisor Password] and press [Enter].
When the Password setting change screen appears, enter the current password in the [Enter Old Password] field.
Press [Enter] in [Enter New Password] and [Enter New Password Again].
When a pop-up window appears, press the [Enter] key.
To save the changes in the system setup, press [F10].
When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.

Execute System Setup, enter the password, and press [Enter].
After moving [Security] by using the arrow keys from the setup start screen, click [Set PCIE SSD Password] and press [Enter].

Tip:
Depending on the model, the menu name may be displayed as PCIE SSD Password, SATA SSD Password, etc.

For models equipped with two PCIE SSD devices installed, the menu names are displayed as PCIE SSD1, PCIE SSD2, and if PCIE SSD and SATA SSD are installed, they are displayed as PCIE SSD, SATA SSD, etc.
When the Password setting change screen appears, enter the current password in the [Enter Old Password] field.
Press [Enter] in [Enter New Password] and [Enter New Password Again].
When a pop-up window appears, press the [Enter] key.
To save the changes in the system setup, press [F10].
When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.