Installation Procedure
For safety reasons, installation procedure should be performed by two or more qualified service personnel.
The weight of the appliance and the height of the installation makes the installation procedure too risky for one person.
Incorrect installation can cause serious accidents.
Do not operate if the appliance is not properly stacked.
Place the appliance on the top of an LG front load washing machine.
Remove the 2 screws from the bottom of the rear cover on each side.
Align the LG stacking kit holes and the rear cover holes in a line.
In case of the top plate size is 600 mm
In case of the top plate size is 550 mm
Fasten the 2 screws that were removed earlier from the appliance to the stacking kit.
Use the 4 screws in the accessory box (16 mm) to assemble the washing machine rear cover and stacking kit.
The procedure for the opposite side will be the same.