Adding Fabric Softeners

• Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil stain.

• Measure and add the recommended amount of fabric softener into the compartment marked with the symbol on the top tub.

  • Follow manufacturer’s direction.

  • Fabric softener is automatically dispensed in the final rinse with indication beep.

  • If you add the number of rinse or select one of the two programmes (Duvet or Extra Clean), you must add fabric softener by hand during the rinse cycle when a melody sounds. The softener permeates into fabric fibers, making clothes feel softer.

  

• Do not overfill. The dispenser holds max 35 mL. Never add more than 35 mL. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes. A cup with a pouring spout will help you avoid spelling.

• The effect of adding fabric softener may vary according to its viscosity. The sticker fabric softener makes its effect lower. For a sticky softener it is recommended that it be diluted with water, then be manually put during the time when the washer beeps several times before the final rinse. This function informing correct time dispense manually is optionally applied to some models. Please keep it in mind that fabric softener has to be diluted with water before dispensed and poured directly on clothes.