Each programme has default settings that are selected automatically. You may also customise these settings using these buttons.
Use this option to select the wash strength.
Press the Nivel de suciedad (Soil Level) button repeatedly until the desired soil level is selected.
Use this option to change water temperature.
Press the Temp. button until the desired setting is lit.
This appliance detects the amount of clothes automatically, then sets the water level. However, manually increasing the water level may be required and recommended to avoid linting and unbalanced errors when the load is bulky but lightweight.
Press Nivel de Agua (Water Level) option to adjust water level.
When you select a wash programme, the water level will be shown on the control panel.
When water level is automatically detected, it may differ depending on the amount of clothes even though the same water level is indicated on the control panel.
Adjusting the wash time setting modifies the cycle times and/or wash actions.
Press Lavado (Wash) button until the desired wash time is selected.
Use this option to change the number of rinses.
Press Enjuague (Rinse) button to change the number of rinses.
When the Enjuague (Rinse) option is selected, l icon is lit.
If selecting the maximum number of rinses, then this option is deactivated.
This option is only available on some programmes.
Use this option to change the spin strength. When you press the START/PAUSE button after selecting this option, the remaining time is indicated on the display.
Always keep the clothes amount to 2 kg or less and make sure to redistribute the clothes evenly.