Control Panel and Functions

1. Defrost Knob

   Defrost button can be used for removing the excess frost and ice from freezer components. For better Efficiency of refrigerator, push the defrost knob after every 2 days/ ice level reaches defrost indicator.

Knob dial Setting

Specially designed knob gives you the facility to control the temperature inside the fridge.

• Turn the dial to select a desired temperature between 1 (Cold) and 7 (Coldest).

• Before loading, let the refrigerator run for 12 hours at position 4.5.

  Refrigerator needs to run a minimum of 8 hours continuously to freeze the freezer compartment and provide maximum cooling retention.

• Temperature setting as per shown picture.

  • Winter Season

    

  • Monsoon Season

    

  • Summer Season

    

Defrosting

It is natural for moisture in the air to condense on the cold surface. This leads to a regular build up of frost on the surface of the freezer and the cooling in the fresh food compartment. This frost accumulation reduces the cooling effect, thereby reducing efficiency. Therefore, periodic defrosting is necessary to ensure optimum performance.

• The water in the drain tray evaporates by natural evaporation if defrosting is done once in two days. However, due to varied conditions of usage it is desirable to check the drain-tray occasionally and dispose of the water, if any, ensure that the chiller tray is in its correct position by pushing it to its correct position by pushing it to its extreme. Otherwise the defrosting water may fall over the contents of the refrigerator.

• Manual Defrosting: In case of defrosting or power failure the water directly accumulates in the chiller tray. Dispose of water directly from the chiller tray by taking it out.