Top > OPERATION > Using the Appliance > Control Panel

Control Panel

The appliance does not need to be switched on and off separately. After plug-in, the hood will enter standby state. When you press the button, a beep will heard, the indicator light on the button will be on/off.

a Light

The light can be switched on and off independently of the ventilation system.

  • Press the Light button to turn on the light.

  • If you want to turn off the light, press the Light button again.

b Speed Selection

Depending on the setting of each button, the hood will operate in one of four modes: low speed mode, middle speed mode, high speed mode, and boost speed mode.

  • Press the button to turn on the hood at the desired speed.

  • If you want to turn off the motor, press the button again.

  • If you want to change the speed mode, just press the button of the desired speed.

  • c Low Speed

  • d Middle Speed

  • e High Speed

f Boost

This hood has a booster function (boost speed mode). To activate the booster, press Boost button and it will increase speed for 8 minutes, before slowing down again.

We recommend that you switch on the hood for a few minutes before you start cooking, and then leave it running for approximately 8 minutes afterwards to ensure that all odours are extracted.

Warning
  • Accessible parts may become hot when used with cooking appliances. To illuminate the cooking area underneath the hood, push the Light button into the “on” position. To switch off, press the button again to return to the “off” position.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  • To operate the hood, press the button for the required speed - select: low speed c, middle speed d, high speed e or boost f. The indicator light will illuminate to show when the fan is operating. To switch off, press the button of the active mode function.