Replacing the Light

LED light

Round/Diameter	70 mm
Max. Power	1.5 W
Voltage	DC 12 V
Picture
Lamp Cap	-
ILCOS D code	DSR-1.5-S-70

• Switch off the extractor hood and isolate the extractor hood by pulling out the mains plug or switching off at the fuse.

• Remove the grease filter.

• Remove the light by levering its fitting from the hood body (this may require pressure or force to be applied).

  

• Disconnect the connection to the light.

• Replace the light with a new one of the same type, and make sure that you connect the light to the light cable correctly..

• Reinstall the light back into the hood body.