Start/Stop
Speed
Controls the fan speed.
Display
Turn on/off the display lighting.
Mosquito Away (Optional)
Turn on/off the mosquito away function.
Mosquito Away is turned on only when the fan is running.
Timer
Set time to power off.
Sleep
Turn on/off the sleep mode.
When you enter sleep mode, the wind speed decreases by one step every hour. In case of “Speed1”, it is maintained.
For/Rev (Optional)
Change the fan direction.
If you press button once and hear the beep sound once, the fan rotates counter-clockwise.
If you hear the beep sound twice, the fan rotates clockwise.
When you change the fan direction, the fan speed decreases and stops for a while, then the fan direction changes.
It is recommended to use the counter-clockwise direction during summer and the clockwise direction during winter.
Wi-Fi (3s) (Optional)
Press this button during 3 seconds for pairing. For unpairing, press 3 seconds again.
Turning off Wi-Fi
Press and hold the Start/Stop button and the For/Rev button at the same time for more than 3 seconds to turn off Wi-Fi. After finishing the product registration and while Wi-Fi is off, press and hold the For/Rev button for more than 3 seconds just once to turn on Wi-Fi and to control the product using the registered smartphone.
If operating the fan with regulator, you have to set up the regulator with 5 step (maximum) only.
If you miss your remote controller, you can operate the fan by using wall switch on/off. It is recommended to use IS marking wall switch.
The appearance or function of the remote controller may vary depending on the model.
1 time | Return to previous step before you switch on/off. | |
2 times | Speed 1 | |
3 times | Speed 2 | |
4 times | Speed 3 | |
5 times | Speed 4 | |
6 times | Speed 4, Change the fan direction. (Optional) |