Installing the Rear Filler

If the counter does not bridge the opening at the rear wall, the rear filler kit that is provided with the slide in range will be needed.

Note

If the countertop depth is greater than 25 3/8" there will be a gap between the filler kit and the back wall.
If the countertop depth is less than 24 3/4", the control panel will not sit flush with the countertop.

Using a screwdriver, remove the three screws holding the rear top plate in place.
a Rear Top Plate
Attach the rear top plate and filler assembly as shown, using three screws removed in step 1.
b Rear filler