Check if the range is properly installed and run a test cycle.
Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier.
Turn the oven mode knob to the O F F position to start test.
Turn each knob to the H I position to check that the surface heating elements are working properly. The elements should glow red and radiate heat, and they should cycle on and off periodically even when the knob is in the H I position. This cycling prevents the glass-ceramic from being cracked by thermal shock.
The Warm Zone does not consume enough power to glow red.
After checking all the surface heating elements, check the locking system by pressing Control Lock for three seconds. The oven controller should lock and the cooktop should not operate while the Control Lock function is turned on. Pressing Control Lock for three seconds to disable Control Lock.
Now check the oven's operation. Turn the oven mode knob to select the Bake mode. 350 °F appears in the display. Press START.
The oven should finish preheating in 15 minutes, and the convection fan should operate while the oven is preheating.
After checking the oven's operation, turn the temperature up to 450 °F and leave the oven on for at least an hour to help remove any oil which might cause smoke and odors when first using the oven.
Smoke may come out of the range when it is first used.