Settings (Hour Mode, Convection Auto Conversion, Calibrating the Oven Temperature, Preheat Alarm Light, Beeper Volume, Fahrenheit or Celsius, Cooktop on Alert Volume)
Press the Settings button repeatedly to toggle through and change oven settings.
The Settings button allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
calibrate the oven temperature
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between Fahrenheit and Celsius
set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To set the clock to 24-hour mode, follow the steps below.
Press Settings once.
Press 1 to toggle between a 12-hour and 24-hour clock.
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 25 ℉ / 14 ℃. This auto converted temperature shows on the display. For example, select Conv. Bake, enter 350 ℉, and 325 ℉ shows on the display after preheat.
Press Settings repeatedly until Avto appears in the display.
Press 1 to disable or enable auto conversion.
Press START to accept the change.
The convection cooking mode uses air circulation to cook faster and more evenly than the normal cooking mode, so you can get better cooking results than normal baking even when the temperature is reduced by 25°F / 14℃.
Calibrating the Oven Temperature
When you start using the oven, pay careful attention to the recommended temperatures, times, and rack positions in the manual. This oven may differ from your previous oven, and it may take some time to become accustomed to it. If you have followed the recommended guides for this oven and still believe that the temperature is hotter or colder than expected, you can manually calibrate the displayed oven temperature.
There are 2 methods for adjusting the temperature display.
Method 1: Try to gauge how much to increase or decrease the displayed temperature by testing familiar recipes at higher or lower temperatures than recommended. This may help you decide the amount of temperature adjustment you want.
Method 2: Adjust the temperature to 15 °F (8 °C) hotter or cooler at first. Try the oven with this setting. If you still need to adjust the oven temperature, use the results of the first adjustment as a reference and vary the temperature adjustment amount until the oven temperature display is calibrated to your satisfaction.
Press Settings a repeatedly until AdJU b shows in the display.
Use the number buttons c to enter the number of degrees you want to adjust the oven temperature. The temperature adjustment is shown next to AdJU d. You can adjust the temperature up or down by 35 °F or 19 °C.
To lower the temperature, press Settings a to add a minus sign (-) to the displayed number. To raise the temperature, press Settings a to remove the minus sign in the display.
Press START e to accept the change.
This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be adjusted by ±35 °F (±19 °C).
Once the temperature is adjusted, press Settings repeatedly until AdJU is displayed to see the amount you adjusted and change it if needed.
The temperatures displayed by an oven thermometer placed in the oven cavity may differ from the actual set oven temperature in all modes.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened.
You can activate or deactivate the preheating alarm light.
Press Settings repeatedly until PrE appears in the display.
Press 1 repeatedly to select the light on/off.
Press START to accept the change.
Adjusting the Beeper Volume
Press Settings repeatedly until 8EEP appears in the display.
Press 1 repeatedly to select Hi, Lo or Off.
Press START to accept the change.
Adjusting the beeper volume does not affect the preheat alarm volume.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either Fahrenheit (℉) or Celsius (℃) units. The oven defaults to Fahrenheit unless changed by the user.
Press Settings repeatedly until UNit appears in the display.
Press 1 repeatedly to select F (Fahrenheit) or C (Celsius).
Press START to accept the change.
Adjusting Cooktop on Alert Volume
Press Settings repeatedly until CtOP appears in the display.
Press 1 to select Hi, Lo, Off.
Press START to accept the change.