Top > MAINTENANCE > Cleaning Function > Using Auto Clean+ Function

Using Auto Clean+ Function

In the Cooling and Dehumidification modes, moisture is generated inside the indoor unit. You can reduce that moisture.

  • Turn the appliance on.

  • Press the Function button.

  • Press the L or M button to select Auto Clean+ and then press the Function button.

  • Press the L or M button to select the desired settings and then press the Function button. Setup is complete.

    • Each time you press L or M button, it changes in the order of Stop & On & Off & Back.

Note

  • When you use the appliance for the first time, the Auto Clean+ function is set. If you don't want to use Auto Clean+ function, turn it off.

  • The Auto Clean+ time is automatically set according to the appliance usage conditions.

    • The Auto Clean+ time is up to 25 minutes.

  • Once the Auto Clean+ function is set, the previously set Auto Clean+ function will be maintained when the appliance is used again.

  • If the appliance will not be used for a long period of time, run the fan mode for more than 1 hour to completely dry the inside of the appliance before storing it.

  • You can set the Auto Clean+ function even when the appliance is not operating.