Top > OPERATION > Using Special Functions > Human Detecting Sensor (On Some Models)

Human Detecting Sensor (On Some Models)

Direct and Indirect Airflow

This feature detects people and sets either a Direct or Indirect airflow based on your preferences.

  • Direct Airflow

    After detecting an occupied area, it directs the airflow to the occupied area.

  • Indirect Airflow

    After detecting an occupied area, it directs the airflow to the unoccupied area.

  • Press and hold the à button for about 3 seconds to set direct and indirect function.

    • Each time button pressed, the function changes in this order: Direct ~ Indirect ~ Off

      1. Direct

      2. Indirect

      3. Off

Absence Detection

It automatically changes to energy saving operation when no one is present.

  • If you leave the appliance turned on while you are out, the appliance automatically performs energy saving cooling operation or turns off the power when the absence detection time elapses, saving on electricity bills.

  • Connect the appliance to the LG ThinQ application to set the absence detection time and absence detecting mode.

  • Press the Function button.

  • Press L or M button to set the below icon flashes at the bottom of the display screen. Then press the Function button.

  • Press the L or M button to set absence detection function.

    • Each time button pressed, the function changes in this order: ON & OFF

  • Then press the Function button.

Note

  • The Direct and Indirect Airflow operation are available with Cooling, Heating mode.

  • The sensitivity of the radar sensor may vary depending on the indoor environment and conditions, including:

    • If there is little movement, such as while watching TV or sleeping

    • If you are sitting on the floor close to the appliance

    • If you are in a location far from the appliance approximately 5 m (16 ft) or more

  • Moving objects such as fans, robot vacuum cleaners, or companion animals may be mistaken for people.