Operation

• Do not modify or extend the power cable. Scratches or peeling insulation on the power cables may result in fire or electric shock, and should be replaced.

• Make sure that the power cable is neither dirty, loose, nor broken.

• Do not place any objects on the power cable.

• Do not place a heater or other heating appliances near the power cable.

• Take care to ensure that the power cable could not be pulled out or damaged during operation.

• Never touch, operate, or repair the air conditioner with wet hands.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating.

• Make sure that children do not climb on or hit the outdoor unit.

• Be sure to use only those parts listed in the service parts list. Never attempt to modify the equipment.

• Do not touch the refrigerant pipe, water pipe or any internal parts while the unit is operating or immediately after operation.

• Do not leave flammable substances such as gasoline, benzene, or thinner near the air conditioner.

• Do not use the air conditioner for an extended period of time in a small place without proper ventilation.

• Be sure to ventilate sufficiently when the air conditioner and a heating appliance such as a heater are used simultaneously.

• Do not block the inlet or outlet of airflow.

• Cut off the power supply if there is any noise, smell, or smoke coming from the air conditioner.

• Contact an authorized service centre when the air conditioner is submerged by flood waters.

• In the event of a gas leak (such as Freon, propane gas, LP gas, etc.) ventilate sufficiently before using the air conditioner again.

• Cut off the power supply immediately in the event of a blackout or a thunderstorm.