The range should always be plugged into its own individual properly grounded electrical outlet.
This prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
It is recommended that a separate circuit serving only this appliance be provided.
Connection of this appliance must comply with national and local safety regulations.
Connection to a switched socket is recommended as this provides easier access in the case of a service call.
For extra safety, it is advisable to protect the appliance with a suitable residual current device (RCD) with a trip current of 30 mA.
If the switch is not accessible after installation an additional means of disconnection must be provided for all poles. The means of disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
When switched off there must be an all pole contact gap of 3 mm in the isolator switch (including switch, fuses and relays).
Connection data
Blue : Neutral Wire
Green + Yellow : Ground Wire
Brown : Live Wire
The voltage and rated load are given on the data plate situated at the front of the oven frame visible with the oven door open. Please ensure the connection data matches the household supply.
This appliance incorporates an earth connection for functional purposes.