Using the Telescopic Runners
Installing the Telescopic Runners
Install the telescopic runners before operating the oven for the first time.
Allow the oven to cool before installing or removing the telescopic runners to prevent burns.
Place a soft cloth on the floor to avoid damaging the parts. It is essential that the telescopic runners are fitted and secured correctly. Failing to do so could cause the runner and its contents to fall causing serious damage to the oven.
Check the telescopic runner direction, as the long part of the telescopic clip facing down and the pins of the telescopic runner are pointing upwards.
Place the telescopic runner parallel with the rail rack horizontally.
A
Rail Rack
B
Telescopic Runner
Hook both the telescopic runner clips onto the upper rail of the desired rack position.
Place the telescopic runner onto the rail rack until the lower part of the telescopic runner clip buckle clips onto the lower rail of the desired rack position.
Repeat steps 1-4 for the other telescopic runner to install on the other side.
Removing the Telescopic Runners
Allow the oven to cool before installing or removing the telescopic runners to prevent burns.
Place a soft cloth on the floor to avoid damaging the parts. It is essential that the telescopic runners are fitted and secured correctly each time. Failing to do so cold cause the runner and its contents to fall causing serious damage to the oven.
Pull forward the telescopic runner clips
A
Telescopic Runner Clip
B
Telescopic Runner
C
Rail Rack
Lift up the whole telescopic runner and pull it away to detach from the rail rack.
Using the Telescopic Runners
The telescopic runners slide in and out on a frame. This keeps heavy cookware level and prevents it from sliding forward when the telescopic runner is completely extended.
Make sure to slide the tray and wire grill in a correct position as the telescopic runner pins are inserted through the holes on both sides.
