Cleaning the Filters

Clean the exhaust filter regularly and wash them in running water at least once a month to maintain the optimum suction power of the appliance.

Allow them to dry in the sun before re installing them.

• The frequency of cleaning depends on where and how often you use the product. Clean the filters more frequently if the appliance is used regularly or in areas with a lot of dust.

• Filters are consumables. Please purchase more filters from an authorized service center.

• Remove the battery from the product body.

• Grasp the exhaust filter cover and turn it to the left to open the cover.

  

• Lift the open cover.

  

• Lift out the exhaust filter a from the product body.

  

• Use the combination tool c to clean any dust off the motor.

  • Do not wash the motor with water.

    

• Insert the crevice tool d into the cyclonic mesh filter c and turn it counterclockwise to remove the filter.

  

• Remove the pre-filter e from the Cyclonic Mesh Filter c.

  • When separating the Cyclonic Mesh Filter, the pre-filter is separated in an assembled state. If it was not separated together with the Cyclonic Mesh Filter, check the inside of the vacuum cleaner and take out the pre- filter.

    

• Clean the filters by brushing the dust off it regularly and wash it in running water at least once a month.

  • To avoid odor and the malfunction of the motor, allow the filters to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

    

• Assemble the completely dry pre-filter e by turning it to the left into the cyclonic mesh filter c.

  • When assembling the pre-filter, turn it fully until you hear a click. If you do not hear a click, it is not fully assembled.

    

• Insert the crevice tool d to the cyclonic mesh filter c, then turn it clockwise to assemble.

  • When assembling the cyclonic mesh filter onto the product body, turn it fully until you hear a click. If you do not hear a click, it is not fully assembled.

    

• Assemble a completely dry exhaust filter a to the product.

  • When assembling the exhaust filter, assemble it according to the groove.

    
    

• Close the exhaust filter cover, press down and turn it to the right to lock the cover.