Power On/Off Button

• Press this button to turn the washing machine on.

Programme Knob

• Programmes are available according to the clothes type.

• The lamp will light up to indicate the selected programme.

Start/Pause Button

• This button is used to start the wash cycle or pause the wash cycle.

• If a temporary stop of the wash cycle is needed, press this button.

Customizing Washing Programme Buttons

Use these buttons to adjust the water temperature, spin speed and soil level settings for the selected programme.

• The current settings are shown in the display.

• Press the button for that option to select other settings.

Extra Options and Functions

• To use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display.

• This allows you to select an additional programmes and will light when selected.

Display

• The display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate.

• While the load weight is sensed automatically, the display on the control panel blinks.

Programme Status Indicators

• When a washing programme is running, LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.

Estimated Time Remaining

• When a washing programme is selected, the default time for that programme is displayed. This time will change as options are selected.

• If the display shows --- , then the time will be displayed after the load sensing has detected the load size. This is normal.

• The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load weight, room temperature, incoming water temperature, etc.) can affect the actual time.

The LED lights up when the programme starts and the door is locked.

The LED lights up when the control panel is locked except for the Power button.