Installing the Home Station
Always keep the home station plugged in when in use. If the home station is not plugged in, the robot cleaner will not return to the home station to charge automatically when the battery is low or when the cleaning is completed.
Before use, remove both the foam strips from behind the collision bumper.
If the foam strip are not removed, it may be difficult for the Robot Cleaner to find the charging station or product performance may be adversely effected, and may cause damage to furniture and skirtings.
Remove the protective film attached to the charging station and the Robot Cleaner.
If the protective film is not removed, it may be difficult for the Robot Cleaner to find the charging station or product performance may be adversely effected.
Install the charging station on top of the Floor Damage Prevention Plate. Install the charging station by lowering it into position.
Place the home station on a flat and firm indoor floor and place it hard against a suitable wall in your selected location. Do not install, store or place the home station charging dock or the robot cleaner in any outdoor or sheltered outdoor location.
Remove all obstacles from around the home station.
Connect the power adapter to a wall outlet.
If two robot cleaners are used together, there should be at least 1.5 m distance between home stations.
If the home stations are too close together, the robot cleaner may not be able to return to its home station.
Do not install the home station on a carpet.
If the charging station is not plugged into a power outlet, the Robot Cleaner battery will not charge.
Do not install the charging station in a narrow space. Doing so will make it difficult for the Robot Cleaner to find the charging station.
Make sure that the charging station is plugged into a power outlet during use. If the power supply is not connected to the charging station, the Robot Cleaner cannot automatically returns to the charging station to charge the battery when it is low or when the cleaning is completed.