Top > OPERATION > Control Panel > Control Panel Features

Control Panel Features

	Description
a	Power On/Off Button Press this button to turn the washing machine on or off.
b	Programme Knob Turn the knob to select a programme. The lamp lights up to indicate the selected programme, and preset options show on the display.
c	Start/Pause Button Press this button to start or pause the washing progarmme.
d	Customizing Washing Programme Buttons Use these buttons to adjust the preset water temperature and spin speed for the selected programme. Press the buttons until the desired setting is selected.
e	Extra Options and Functions To use an extra option and function, press the button. To use an extra option and function with asterisk, press and hold the button for 3 seconds. The LED on the button and symbols on the display light up when the corresponding options and functions are activated. i Child Lock Use this option to disable the controls. This function can prevent children from changing cycles or operating the appliance. * Tub Clean This is a special function to help clean the inside of the appliance by soaking, washing, rinsing and spinning.
f	Display The display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate. While the load weight is sensed automatically, the display on the control panel blinks.

	Description
a	Estimated Time Remaining When a washing programme is selected, the default time for that programme is displayed. This time will change as options are selected. If the display shows --- , then the time will be displayed after the load sensing has detected the load size. This is normal. The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load weight, room temperature, incoming water temperature, etc.) can affect the actual time.
b	p lights up when the Spin button is pressed.
c	°C lights up when the Temp. button is pressed.

Description

Estimated Time Remaining

When a washing programme is selected, the default time for that programme is displayed. This time will change as options are selected.
If the display shows --- , then the time will be displayed after the load sensing has detected the load size. This is normal.
The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load weight, room temperature, incoming water temperature, etc.) can affect the actual time.

p lights up when the Spin button is pressed.

°C lights up when the Temp. button is pressed.