Connecting the Drain Hose to the Dryer
Insert the hose clamp a onto the drain hose of the dryer.
Connect the drain hose of the dryer and secure the hose clamp.
Screw in the band to secure the drain hose of the dryer onto the stacking bracket.
Use the provided tie strap b to secure the 2 drain hoses in place.
The drain hose should not be placed higher than 80 cm above the floor. Water in the appliance may not drain or may drain slowly.
Securing the drain hose correctly will protect the floor from damage due to water leakage.
If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise.
If the drain hose is installed in a way that leaves it bent or pinched, drainage may not function properly.
Depending on the installation environment, you may have to purchase a separate drain hose connector. The connector supplied will suit a standard laundry tub side drain hole.
Use the elbow bracket a and the drain hose connector b if necessary. When installing the drain hose to a sink, secure it tightly with string.
