Connecting Hoses to the Drain Hose Connector (Optional)
Additionally follow the steps below to connect the drain hose using drain hose connector if the above installation is not sufficient.
Slide the included band clamp onto the end of the drain hose of the washer.
Connect the drain hoses from the washer and dryer to the drain hose connector. Tighten the band clampa to keep the washer hose in place.
Use the band clampb on the short drain hose to attach it to the bottom opening of the drain hose connector.
Securely connect the short drain hose to a drain spigot, into a standpipe or laundry sink bypass pipe.
When connecting to a waste spigot, use the band clampc to the end of the short drain hose.
Adjust the wire hose clamp to prevent the hose from coming loose or leaking. Failure to do so could result in flooding. Use of the drain hose connector helps avoid siphoning, odours, or improper draining.
Make sure the drain hoses are not kinked or pinched. This is a potential cause of drainage problems or noise.