Attaching Brackets on Mini Washer

• After removing the carton and shipping material, lift the Mini Washer off the foam base, and keep 2 brackets on the foam base.

  • Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the Mini Washer.

  

• Remove and save the foam block for future use.

  • If the Mini Washer must be moved in the future, the foam block will help prevent damage to the Mini Washer during transportation.

  • To prevent damage, do not remove the foam block until the Mini Washer is at the final location.

• Turn the top cover about 180 degrees, cover the opening in the top with the top cover and install 4 short sheet metal screw.

  

• Attach the two back brackets on the rear top of the Mini Washer by inserting 4 machine screws in each bracket.